Viessmann CS Installation And Operating Instructions Manual page 8

GB
Bolt the enclosed holding angle (M) to the unit housing
together with storage cell wall (M4 x 15 bolts (H) for attach-
ment to the blind-rivet nuts (P) in the storage cell wall and
hexagonal nuts (L) with washers (K) for attachment to the
housing).
Loosen the locking screws (4 ea.) on the front access cover.
Be careful to ensure that the serrated lock washers are not
displaced.
Slide the front access cover slightly upwards and pull for-
ward to remove.
Slide the enclosed plastic collar (D) over the defrost water
drain hose (B).
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page No. 8-GB
4
We reserve the right to make technical changes!