Installation Of The Evaporator Unit; Drill Template For Attachment Of The Large Evaporator Unit; Drill Template For Attachment Of The Small Evaporator Unit - Viessmann CS Installation And Operating Instructions Manual

5.2

Installation of the evaporator unit

The evaporator unit is mounted to the ceiling on the inside of the
cold storage cell.
Four bore holes should be made in the cell ceiling according to
dimensional drawings 2.2.1 and 2.2.2.
Protect the cutting edges against rust.
Attach the evaporator unit to the U-profile on the cell ceiling with
the enclosed plastic locking screws.

5.2.1 Drill template for attachment of the large evaporator unit

(CS 2000; CS 2800; FS 1400; FS 1800; FS 2400)
Distance to wall 140 mm with a wall thickness of 150 mm. Distance
to wall 230 mm with a wall thickness of 60 mm.

5.2.2 Drill template for attachment of the small evaporator unit

(CS 0900; CS 1300; FS 0900; FS 1200)
Distance to wall 165 mm with a wall thickness of 150 mm.
Distance to wall 255 mm with a wall thickness of 60 mm.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page No. 13-GB
min. 15
Abstand zur Wand 165 - 255 mm
5.2 - 5.2.2
min. 15
Ausblasöffnung
Draufsicht Decke
Ansaugöffnung
381 mm
We reserve the right to make technical changes!
GB