Installation Of A Wall-Hanging Unit In A Viessmann Cold Storage Cell - Viessmann CS Installation And Operating Instructions Manual

GB
4. Installation of a Wall-hanging unit in a
Viessmann cold storage cell
Sufficient free space must be provided for in front of the
Refrigeration unit intake and discharge openings in order to
warrant a good air flow:
A wall element can be delivered by us with the respective
cut-outs and bore holes for installation in the cold storage
cell.
Otherwise, the required bores holes and cut-outs should
be made on location by a refrigeration technician using
installation templates or the dimensional drawings.
The cutting edges and bore holes must be protected
against corrosion with zinc primer paint.
Attention!
The electrical power supply should first be connected
at commissioning after installation has been completed
-Risk of life!
Loosen the holding angle from the unit.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page No. 6-GB
4
We reserve the right to make technical changes!