M.2 Solid-State Drive; Removing The M.2 2230 Solid-State Drive; Installing The M.2 2230 Solid-State Drive - Dell Latitude 3420 Service Manual

Computers with integrated graphics
Hide thumbs Also See for Latitude 3420:
Table of Contents

Advertisement

5. Follow the procedure in

M.2 solid-state drive

Removing the M.2 2230 solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Enter the
service
mode.
5. Remove the
base
cover.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Remove the (M2x3) screw that secures the solid-state drive to the system board.
2. Slide and remove the solid-state drive from the solid-state drive slot on the system board.

Installing the M.2 2230 solid-state drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.
after working inside your
before working inside your
for 4G LTE enabled systems.
computer.
computer.
Removing and installing components
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P144g

Table of Contents