Camera
Removing the camera
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Enter the
service
mode.
5. Remove the
base
cover.
6. Remove the
WLAN
card.
7. Remove the
WWAN card
8. Remove the
I/O board
9. Remove the
display
assembly.
10. Remove the
display
bezel.
11. Remove the
display
panel.
About this task
The following image indicates the location of the camera and provides a visual representation of the removal procedure.
Steps
1. Peel the adhesive that secures the camera cable to the connector on the camera module.
2. Disconnect the camera cable from the connector on the camera module.
3. Peel the camera cable from the display back-cover.
4. Carefully pry loose and remove the camera module from the display back-cover.
Installing the camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
before working inside your
for 4G LTE enabled systems.
for 4G LTE enabled systems.
cable.
computer.
Removing and installing components
91