4. Install the microSD-card.
5. Follow the procedure in
System fan
Removing the system fan
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Enter the
service
mode.
5. Remove the
base
cover.
About this task
The following image indicates the location of the system fan and provides a visual representation of the removal procedure.
Steps
1. Disconnect the system fan cable from the connector on the system board.
2. Remove the two (M2x3) screws that secure the system fan to the palmrest assembly.
3. Lift and remove the system fan from the palmrest assembly.
after working inside your
before working inside your
for systems enabled with 4G LTE.
computer.
computer.
Removing and installing components
41