Installing the display bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the display bezel and provides a visual representation of the installation procedure.
Steps
Align the display bezel with the display assembly. Gently snap the display bezel into place.
Next steps
1. Install the
display
assembly.
2. Install the
I/O board
cable.
3. Install the
WWAN card
4. Install the
WLAN
card.
5. Install the
base
cover.
6. Exit the
service mode
7. Install the
SIM card tray
8. Install the microSD-card.
9. Follow the procedure in
for 4G LTE enabled systems.
for 4G LTE enabled systems.
after working inside your
computer.
Removing and installing components
61