Installing The Wlan Card - Dell Latitude 3420 Service Manual
Computers with integrated graphics
Hide thumbs
Also See for Latitude 3420:
- Owner's manual (78 pages) ,
- Setup and specifications (23 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Steps
1. Remove the screw (M2x3) that secures WLAN card bracket to the WLAN card on the system board.
2. Lift and remove the WLAN card bracket from the WLAN card that secures the two antenna cables.
3. Disconnect the antenna cables from the connectors on the WLAN card.
4. Disconnect and remove the WLAN card from the WLAN card slot.
Installing the WLAN card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
Steps
1. Connect the two antenna cables to the connectors on the WLAN card.
NOTE:
The antenna cable connectors are fragile and utmost care should be taken while replacing them.
Removing and installing components
37
- Quick Links:
- Removing the Base Cover
- Memory Module
Hide quick links:
Advertisement
Table of Contents
