Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system fan and provides a visual representation of the installation procedure.
Steps
1. Align and place the system fan into the slot on the palmrest assembly.
2. Install the two (M2x3) screws to secure the system fan to the palmrest assembly.
3. Connect the system fan cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Exit the
service mode
3. Install the
SIM card tray
4. Install the microSD-card.
5. Follow the procedure in
42
Removing and installing components
for systems enabled with 4G LTE.
after working inside your
computer.