About this task
The following image indicates the location of the display cable and provides a visual representation of the installation procedure.
Steps
1. Connect the display cable from the connector on the camera module.
2. Connect the display cable from the connector on the display panel.
3. Connect the display cable from the connector on the system board.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
I/O board
cable.
5. Install the
WWAN card
6. Install the
WLAN
card.
7. Install the
base
cover.
8. Exit the
service mode
9. Install the
SIM card tray
10. Install the microSD-card.
11. Follow the procedure in
94
Removing and installing components
for 4G LTE enabled systems. .
for 4G LTE enabled systems.
after working inside your
computer.