Removing The Power Button With Fingerprint Reader - Dell Latitude 3420 Service Manual

Steps
Align and place the power button into the slot on the palmrest assembly.
Next steps
1. Install the ethernet port.
2. Install the I/O board.
3. Install the base cover.
4. Exit the service mode
5. Install the SIM card tray
6. Install the microSD-card.
7. Follow the procedure in

Removing the power button with fingerprint reader

Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the SIM card tray
4. Enter the service mode.
5. Remove the base cover.
6. Remove the I/O board.
7. Remove the ethernet
About this task
The following image indicates the location of the power button with fingerprint reader and provides a visual representation of
the removal procedure.
NOTE:
for 4G LTE enabled systems.
after working inside your
before working inside your
for 4G LTE enabled systems.
port.
computer.
computer.
Removing and installing components 75