Steps
After performing the succeeding steps, you are left with the palmrest assembly.
Next steps
1. Install the
system
board.
2. Install the
WWAN I/O board
3. Install the
USB
cable.
4. Install the
coin-cell
battery.
5. Install the
I/O
board.
6. Install the
power adapter
7. Install the
heatsink
assembly.
8. Install the
system
fan.
9. Install the
display
assembly.
10. Install the
I/O board
cable.
11. Install the
WWAN card
12. Install the
WLAN
card.
13. Install the
hard-disk
drive.
14. Install the
M.2 SSD conversion
15. Install the
M.2 SSD conversion
16. Install the
M.2
SSD.
17. Install the
memory
module.
18. Install the battery.
19. Install the
base
cover.
20. Install the
SIM card tray
21. Install the microSD-card.
22. Follow the procedure in
90
Removing and installing components
for systems enabled with 4G LTE.
port.
for systems enabled with 4G LTE.
plate.
bracket.
for 4G LTE enabled systems.
after working inside your
computer.