About Test Results; Summary Status Results - Viavi MSAM Manual

Multiple services application module

Table of Contents

Chapter 4 Test Results

About test results

After you connect the instrument to the circuit and detect a receive clock, results for the

configured test automatically accumulate. Results are organized by result group, and

then by result category.

A result group exists for each type of test you can perform using the instrument (for

example, data communications or Conditioned Diphase tests). Some result groups and

categories only appear if you purchase the associated option for the instrument, and if

the results are applicable to the current test configuration. For example, the Diphase

result group only appears if you purchase the optional Conditioned Diphase interface

module, and select the Diphase application.

After you connect the instrument to the circuit, press the START/STOP button, and

detect a receive clock, results for the configured test accumulate and appear in the

Result Windows in the center of the screen.

The following sections describe the test results for each of the categories.

The Summary Status category displays a large "ALL SUMMARY RESULTS OK"

message on a green background if no errors, anomalies, alarms, or defects have been

detected (see

Figure 7

Page 30

Figure

7).

ALL SUMMARY RESULTS OK message

Data Communications and Diphase Testing Manual

21148872, Rev. 002

January 2016

Table of Contents