Cleaning The Printer; Cleaning The Exterior; Cleaning The Touch Screen - FujiFilm CX 3240 User Manual

Maintenance

Cleaning the Printer

Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable
when used on electromechanical equipment.
Before cleaning this product, unplug the product from the electrical outlet.
Always use materials specifically designated for this product. The use of
other materials may result in poor performance and create a hazardous
situation.
Always unplug this equipment from the electrical outlet before cleaning.

Cleaning the Exterior

Clean the exterior of the printer once a month.
Important
1
Wipe the exterior with a firmly wrung soft cloth moistened with water.
Important
2
Wipe off any excess water with a soft cloth.

Cleaning the Touch Screen

Clean the touch screen once a month.
10



136
WARNING
Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the printer as

they might discolor, deform, or crack covers.
Cleaning the printer with an excessive amount of water may cause the printer to malfunction or

damage documents during copying.
Do not use cleaning agents other than water or neutral detergent.

Wipe the touch screen with a damp, soft cloth.
After cleaning, wipe with a dry, soft cloth.
For stubborn stains, apply a small amount of mild detergent to the cloth and gently
wipe the stain off.