Support - FujiFilm CX 3240 User Manual

Setting Menus on Touch Screen
LDAP
When LDAP is turned on

You can set the LDAP server settings in the [LDAP Server] screen.
When LDAP is turned off

Wait until the desired server is found, and select the server.
To specify the server by manually entering the server information, select [Manual
6
Setup].
SMTP
Setup the SMTP server.
Once this screen is opened, searching SMTP server starts automatically. Select a
server from the search result.
Also you can specify the SMTP server by entering the server address manually.
Note


Support

Displays the menu for maintenance of the printer.
Support Pages
Allows you to print reports.
[Ghosting Print]

[Repeating Defects]

[System Status]

[Error History Report]

[LDAP Communication Report]

[SMB Communication Report]

[SMTP Communication Report]

66
Item
Test Connection
Server Address
SSL/TLS
Directory Root
User Name
Password
Find Other LDAP
Servers
LDAP Communication
Report
If SMTP is already enabled, the search is not performed automatically and the SMTP Server screen
is displayed.
Description
To test the connection to the server, select [Test Connection].
Initially [Not Tested] is displayed. [Success] or [Failed] is
displayed as a result of the test.
Sets the server address.
To encrypt the communication between the server and the
printer, enable [SSL/TLS].
Sets the directory root.
Enter the login name for searching in LDAP server.
Enter a password for the user specified in [User Name].
Opens the LDAP server list.
Outputs the report that shows the contents of the LDAP
communication transmitted and received by the printer.