Supplies; Billing/Usage; General - FujiFilm CX 3240 User Manual

Supplies

See "Supplies" (P.76).

Billing/Usage

Selecting [Billing/Usage] allows you to check the billing information. The [Billing/
Usage] screen shows [Serial Number], [Counter] and [Usage Counters].
In the [Usage Counters] screen, you can check the detailed usage counters. You can
filter the counters by setting the filter (set to [All] by default) over the counter.

General

Measurements
 Units
Allows you to select a unit of measurement displayed on the screen from [Millimeters]
and [Inches].
 Paper Size Preference
Allows you to select the unit of default paper size to be used for printer settings.
To use the A4 size paper for the following printer settings by default and to set the
[Units] setting to [Millimeters], select [Metric].
To use the Letter size paper for the following printer settings by default and to set the
[Units] setting to [Inches], select [Inch].
Default paper size for printing

Default custom paper sizes displayed on the screen for each paper tray

Default paper size of each paper tray and the bypass tray

Date & Time
Set the date and time for the system clock of the printer. The date and time set here
will be printed on all lists and reports.
 Set Automatically
Select this to set the date and time automatically according to the time server.
If you do not select this, you can set the time zone, date and time, and daylight saving
time manually.
 Time Server (SNTP)
Touch this to set the time server.
Server Address

Enter a server address.
 Time Zone
Sets the region and time zone.
 Date & Time
Sets the date and time.
Device App
6
61