FujiFilm CX 3240 User Manual page 196

Problem Solving
027-768
027-769
027-772
027-773
027-774
027-775
11
027-776
027-777
027-778
196
Error Code
[Cause] Certificate validation error
[Remedy]
[Cause] WebDAV server connection error
[Remedy]
[Cause] An error occurred during communication with the SMTP
[Remedy] Use ASCII characters to modify the printer's host name
[Cause] An error occurred during communication with the SMTP
[Remedy] Wait for a while, and then execute the operation again.
[Cause] The specified e-mail address contains unsupported
[Remedy] Specify the e-mail address using only ASCII characters.
[Cause] Too many destination addresses have been specified.
[Remedy] Reduce the number of destination addresses. If the error still
[Cause] An error occurred during communication with the SMTP
[Remedy] Use ASCII characters to modify the printer's host name
[Cause] The destination SMTP server does not support SMTP-AUTH.
[Remedy] On Printer Configuration Web Tool, disable authentication for
[Cause] The destination SMTP server does not support the SMTP-
[Remedy] Confirm the authentication type supported by the SMTP server
Cause/Remedy
Check if the destination WebDAV server is accessible from

a computer.
Check if the SSL server certificate for the destination

WebDAV server is registered in the printer.
Check if the SSL server certificate for the destination

WebDAV server is not expired, or is not in the certificate
revocation list. Check the time setting in the printer. Check
the certificate path for the SSL server certificate, and import
the CA certificate.
If a certificate is not registered in the destination WebDAV

server, disable certificate validation.
Check the network cable connection.

Check if the destination WebDAV server is accessible from

a computer.
Check the network interface.

server.
setting. If the error still is not resolved, confirm with your
network administrator whether the SMTP server supports the
HELO command.
server.
characters.
is not resolved, confirm with your network administrator
whether the SMTP server supports the EHLO command.
server.
setting. If the error is not resolved, confirm with your network
administrator whether the SMTP server supports the EHLO
command.
sending e-mail.
AUTH system set on the printer.
with your network administrator. the printer supports the
following authentication types: AUTH GSSAPI (only for
Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH PLAIN,
AUTH LOGIN, AUTH CRAM-MD5.