Honeywell Marathon User Manual page 98

Setting
Ad Hoc Channel
Aggressive Scan
CCX Features
WMM
Auth Server
TTLS Inner Method
PMK Caching
WAPI
TX Diversity
RX Diversity
6 - 48
Default Function
1 Use this setting when the Radio Mode profile is set to Ad Hoc.
Specifies the channel to be used for an Ad Hoc connection to another client de-
vice. If a channel is selected that is not supported by the by the radio, the default
value is used.
Options are:
1 through 14 (the 2.4GHz channels)
36, 40, 44, 48 (the UNII-1 channels)
On When set to On and the current connection to an AP weakens, the radio aggres-
sively scans for available APs.
Aggressive scanning works with standard scanning (set through Roam Trigger,
Roam Delta and Roam Period). Aggressive scanning should be set to On unless
there is significant co-channel interference due to overlapping APs on the same
channel.
Options are: On, Off
Optimized Use of Cisco Compatible Extensions (CCX) radio management and AP specified
maximum transmit power features.
Options are:
• Full - Use Cisco IE and CCX version number, support all CCX features. The
option known as "On" in previous versions.
• Optimized –Use Cisco IE and CCX version number, support all CCX features
except AP assisted roaming, AP specified maximum transmit power and
radio management.
• Off - Do not use Cisco IE and CCX version number.
Cisco IE = Cisco Information Element.
Use of Wi-Fi Multimedia extensions.
On
Devices running Windows XP can change the default value. Devices running all
other OS cannot change the default value.
On
Off
Type 1 Specifies the type of authentication server.
Options are: Type 1 (ACS server) and Type 2 (non-ACS server)
Auto-EAP Authentication method used within the secure tunnel created by EAP-TTLS.
Options are:
AUTO-EAP (Any available EAP method), MSCHAPV2, MSCHAP, PAP, CHAP,
EAP-MSCHAPV2
Standard Type of Pairwise Master Key (PMK) caching to use when WPA2 is in use. PMK
caching is designed to speed up roaming between APs by allowing the client and
the AP to cache the results of 802.1X authentications, eliminating the need to
communicate with the ACS server. Standard PMK is used when there are no
controllers. The re-authentication information is cached on the original AP. The
client and the AP use the cached information to perform the four-way handshake
to exchange keys. Opportunistic PMK (OPMK) is used when there are control-
lers. The re-authentication information cached on the controllers. The client and
the controller behind the AP use the cached information to perform the four-way
handshake to exchange keys.
If the selected PMK caching method is not supported by the network infrastruc-
ture, every roam requires full 802.11X authentication, including interaction with
the ACS server.
If the active profile is using WPA2 CCKM, the global PMK Caching setting is ig-
nored and the client attempts to use CCKM.
Options are: Standard, OPMK
Off Default is Off and dimmed (cannot be changed).
On Handle antenna diversity when transmitting packets to the Access Point.
Options are: Main only, and On.
On Start on Handle antenna diversity when receiving packets from the Access Point.
Main Option is: On-start on Main
This setting cannot be changed for some Summit radios.