Code 39 Check Digit Verification; Transmit Code 39 Check Digit - Honeywell Marathon User Manual

Code 39 Check Digit Verification

When enabled, this parameter checks the integrity of a Code 39 symbol to ensure it complies with specified check digit
algorithms.
Only Code 39 symbols which include a Modulo 43 check digit are decoded when this parameter is enabled.
Note: When

Transmit Code 39 Check Digit

Enable this feature if the code 39 bar codes contain a Modulo 43 check digit.
Set this parameter by scanning either of the bar codes shown below.
Enable Code 39 Check Digit Verification
* Disable Code 39 Check Digit Verification
Transmit Code 39 Check Digit
When enabled, the check digit is transmitted with the data.
Note: Code 39 Check Digit Verification
Set this parameter by scanning either of the bar codes shown below.
Enable Transmit Code 39 Check Digit
* Disable Transmit Code 39 Check Digit
13 - 50
(page 13-50) is enabled, this parameter must be enabled too.
(page 13-50) must be enabled for this parameter to function.