Connecting An Audio Device; Software Configuration Options; Setting Date And Time; Setting Power Management - Honeywell Marathon User Manual

Connecting an Audio Device

The Marathon provides an external headset connection via an audio jack connector under the left-side port cover. When the
audio port is not in use, keep the port cover door closed.
1. Open the left-side port cover.
2. Insert the speaker or headphone plug into the audio connector; making sure the plug is firmly seated in the jack.

Software Configuration Options

Many configuration options are available in the Microsoft Windows Control panels. For additional information, refer to Help and
Support on the Start menu for configuration details.

Setting Date and Time

Use the windows interface to set date, time and time zone. Tap the time displayed in the task bar or tap:
Start > Control Panel > Clock, Language and Region > Date and Time (Category view)
Start > Settings > Control Panel > Date and Time (Classic view), or tap
Start > Settings > Control Panel > Date, Time, Language and Regional Options > Change the Date
and Time (Category view)

Setting Power Management

Use the Windows interface to set power management options. Tap the battery icon in the task bar or tap:
Start > Control Panel > Hardware and Sound > Power Options (Category view)
Start > Settings > Control Panel > Power Options (Classic view), or tap
Start > Settings > Control Panel > Performance and Maintenance > Power Options (Category view)

Setting Speaker Volume

Use the Windows interface to control speaker volume. Tap the speaker icon in the task bar or tap:
Start > Control Panel > Hardware and Sound > Sound (Category view)
Start > Control Panel > Sound (Classic view)
Start > Settings > Control Panel > Sound and Audio Devices > Sounds (Classic view), or tap
Start > Settings > Control Panel > Sounds, Speech and Audio Devices > Adjust the System Volume
(Category view)
2 - 12