Table of Contents
Advertisement
CONFIGURING THE DEVICE
Setting
Syslog Server
Network Settings
The etherFAX A2E is configured to use DHCP if available. However if DHCP is not available for use the device can be
configured to use a static or manual IP configuration.
To configure network settings, go to Settings > Network. After changing settings, click Save.
Field
Automatically configure network
using DHCP.
If DHCP is disable, enter the following:
Network Address
Network Mask
Gateway
DNS Servers
Device Information
The device information section shows the device serial number and its registration status on the etherFAX
network.
Click Update to update the registration status.
Service Information
Service Logging
The Service Information section displays the last 1000 entries of the etherFAX A2E log. To refresh the log, click
Update.
When submitting a support ticket please include the current log window, along with your issue description.
12
Description
IP or hostname address to use for output of etherFAX A2E device syslog messages
Description
Select On to enable DHCP. Select Off to disable DHCP.
etherFAX A2E device local IP address
Network's subnet mask.
The IP address of network gateway the etherFAX A2E device routes traffic
to.
Domain Name Servers for the etherFAX A2E device. To specify multiple DNS
servers, use a comma (,) between entries.
®
etherFAX
A2E MT200A2E-EF User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the etherFAX A2E and is the answer not in the manual?
Questions and answers