Multitech etherFAX A2E User Manual page 16

CONFIGURING THE DEVICE
Setting
CSID
Delivery Reports
Lines to Skip
Enabled
Send Enabled
Receive Enabled
Removing a Device
To delete device from in the etherFAX Client Portal:
1. Click Remove to the right of the device you want to delete.
2. Confirm the removal.
Assigning DIDs/TFNs to a Device
You can assign any number currently provisioned to your etherFAX account to an etherFAX A2E device. Assigning a
number to the device allows it to receive faxes sent to the specified number(s) and print them out via the attached
analog fax device.
To assign a DID or TFN to a device:
1. In the etherFax Client Portal, go to A2E devices and select Edit for the device you want to assign the DID
to.
2. Choose the number you want to add from the drop-down near the bottom of the form. This drop-down
lists all the available numbers on the etherFAX account.
3. Click Assign DID.
4. Repeat Steps 2 and 3 for each number you want to add.
5. Click Save. The numbers are attached to that device.
16
Description
Called Subscriber Identification, text or numeric value, usually company name or fax
number.
Sets when delivery reports are printed. Options are:
■
Errors only
■
Always
■
Never
Defines number of raster lines to remove from top of a page. Use this to drop the
analog fax device's header and replace it with an etherFAX supplied header.
Enable or disable the device.
Enables the device for send fax functionality.
Enables the device for receive fax functionality.
®
etherFAX A2E MT200A2E-EF User Guide