At+Qgpsxtradata Inject Gpsonextra Data File - Quectel LPWA Series BG96 Application Note

must be injected first via this command.
AT+QGPSXTRATIME Inject gpsOneXTRA Time
Test Command
AT+QGPSXTRATIME=?
Write Command
Inject gpsOneXTRA time
AT+QGPSXTRATIME=<op>,<XTRA_ti
me>[,<UTC>[,<force>,<uncrtn>]]
Maximum Response Time
Characteristics
Reference
Parameter
<op> Integer type. Operation type.
0
<XTRA_time> String type. Current UTC/GPS time.
Format: YYYY/MM/DD,hh:mm:ss. e.g. "2016/01/03,15:34:50".
<UTC> Integer type. The type of time.
0
1
<force> Integer type. Allows or forces GPS subsystem to accept the time injected.
0
1
Integer type. Uncertainty of time. Default value: 3500. Unit: millisecond. It indicates
<uncrtn>
the time difference between sending a request to the SNTP server and receiving a
response from the SNTP server. If the set time is less than 3.5 s, it will be counted as
3.5 s.
<errcode> Integer type. Error code of operation. See Chapter 4 for details.

2.2.9. AT+QGPSXTRADATA Inject gpsOneXTRA Data File

This command injects gpsOneXTRA assistance data file to GNSS engine. Before operating this command,
you must enable gpsOneXTRA, store the valid gpsOneXTRA data file into UFS of the mudule and inject
gpsOneXTRA time to GNSS engine. After operating this command successfully, gpsOneXTRA data file
can be deleted from UFS file, and you can query whether the gpsOneXTRA data is injected successfully
BG96_GNSS_Application_Note
Response
+QGPSXTRATIME:
<UTC>s),(list of supported <force>s),<uncrtn>
OK
Response
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
300 ms
The command takes effect immediately;
The configuration will not be saved.
Inject gpsOneXTRA time
GPS time
UTC time
Allow acceptance
Force acceptance
LPWA Module Series
BG96 GNSS Application Note
0,<XTRA_time>,(list of supported
30 / 42