At+Qgpsxtra Enable/Disable Gpsonextra Assistance Function; At+Qgpsxtratime Inject Gpsonextra Time - Quectel LPWA Series BG96 Application Note

<errcode>

2.2.7. AT+QGPSXTRA Enable/Disable gpsOneXTRA Assistance Function

The command enables/disables gpsOneXTRA Assistance function, and the function can be activated after
restarting the module.
AT+QGPSXTRA Enable/Disable gpsOneXTRA Assistance Function
Test Command
AT+QGPSXTRA=?
Read Command
AT+QGPSXTRA?
Write Command
AT+QGPSXTRA=<XTRA_enable>
Maximum Response Time
Characteristics
Reference
Parameter
<XTRA_enable>
<errcode>

2.2.8. AT+QGPSXTRATIME Inject gpsOneXTRA Time

This command injects gpsOneXTRA time to GNSS engine. Before using it, you must enable gpsOneXTRA
Assistance function via AT+QGPSXTRA=1. After activating the function, the GNSS engine will ask for
gpsOneXTRA time and assistance data file. Before injecting gpsOneXTRA data file, gpsOneXTRA time
BG96_GNSS_Application_Note
"GSA"
"VTG"
"GNS"
Integer type. Error code of operation. See Chapter 4 for details.
Response
+QGPSXTRA: (list of supported <XTRA_enable>s)
OK
Response
+QGPSXTRA: <XTRA_enable>
OK
Response
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
300 ms
The command takes effect after rebooting.
The configuration is saved automatically.
Integer type. Enable/disable gpsOneXTRA Assistance function.
0 Disable
1 Enable
Integer type. Error code of operation. See Chapter 4 for details.
LPWA Module Series
BG96 GNSS Application Note
29 / 42