Alternating Displays; Function Selection Table - Brother 515 Owner's Manual

22
C H A P T E R T H R E E

Alternating Displays

The LCD sometimes alternates between the currently selected option,
and a help message giving brief instructions about how to proceed. The
display you'll probably see most often is shown below, showing you that
when you place a document in the feeder, you can either dial a number to
send it as a fax or press the copy key to make a copy of the document.
FAX: NO. & START
COPY: PRESS COPY

Function Selection Table

If you have a basic understanding of how to program your machine, you
can perform most of the programming settings without the Owner's
Manual. To help you understand the function selections, options, and
settings that are available, use the Function Selection Table below.
1. INITIAL SETUP
Function
1. TONE/PULSE
2. DATE/TIME
3. STATION ID
4. BEEPER
5. PBX
6. CLOCK CHANGE
Description
Selects the dialling mode.
Enter date and time for LCD
display and to print on
transmissions.
Program the name and fax
number to appear on each
transmitted page.
Adjust the volume level of the
beeps when you press a key, an
error occurs or a document is
sent or received.
Turn on if PABX (Private
Automatic Branch Exchange) is
connected to your machine.
Adjust the machine's clock by
one hour for summer/winter
time.
Factory Set Chapter
TONE 4
1/1/2000 00:00 4
-- 4
LOW 4
OFF 4
-- 4