Changing Remote Access Code; Remote Commands - Brother 515 Owner's Manual

108

Changing Remote Access Code

1 Press Menu, 8, 7.
2 Enter a three-digit number from 000 to
900. The cannot be changed.
Press Set.
3
4 Press Stop to exit.

Remote Commands

Listen to Voice Messages
Press 9 1
then to Repeat a message press 1.
Skip to next message press 2.
Stop playing the message press 9.
Record a Memo
Press 9 2.
Wait for the beep, then speak.
then to Stop recording — Press 9.
Erase All Messages
Press 9 3. If you hear three beeps, all
messages have not yet been heard, and the
messages will not be erased.
Play/Record Outgoing Message
Press 9 4
then to Play TAD MSG press 1 1.
Play F/T MSG press 1 2.
Play PAGING MSG press 1 3.
Record new TAD MSG press 2 1,
then speak after beep. Press 9 to
stop.
Record new F/T MSG press 2 2,
then speak after beep. Press 9 to
stop.
Record new PAGING MSG press
2 3, then speak after beep. Press
9 to stop.
Change Paging/Fax Forwarding Setting
Press 9 5
then to Turn feature off press 1.
Enter Fax Forwarding press 2.
2
Enter Paging press 3.
Program Fax Forward Number
press 4. Enter the new number of
the remote fax machine where
you want your fax messages
forwarded and then press # #.
Press 9 6 1 after two short beeps,
then enter the number of remote
fax machine, and then # # to
retrieve Memory Status List.
Retrieve a Fax
Press 9 6
then to Print a Memory Status List press
1, then enter the number of
remote fax machine, and then # #.
After the beep, hang up and wait.
Retrieve all faxes press 2, then
enter the number of remote fax
machine, and then # #. After the
beep, hang up and wait.
Erase all fax messages press 3.
3 4