Table of Contents
Advertisement
Outputs
Each CM705B universal expander module includes 4 protected open-collector outputs that can be used to increase
the number of programmable outputs available on the system. Each output is fully protected and can be configured
to monitor for both open and short circuit output conditions.
Outputs can be used to operate LED indicators, operate relays to control garage doors, lighting, sprinklers, pumps, air
conditioning or door strikes etc.
Programming
Output programming options are fully detailed in the control panel installation manual and quick reference guides.
The following sequence outlines the correct output programming procedure.
1) Program the Output Name
Output names are used to simplify programming, user interaction and reporting.
2) Select the Output Event Type
Over 60 different event types are available to suit a variety of applications.
3) Program the Output Event Assignment
Assigns the output to a specific user, zone, area or door assignment etc.
4) Select the required Output Polarity
Configures how the output behaves (eg. operates for fixed period of time, pulses etc).
Bosch Security Systems
09/12 CM705BIRG FTR1.1
Solution E Series and Solution 144 Panels
Address Setting
Module
Number
SW1 SW2 SW3 SW4 SW5
1 =
OFF OFF OFF OFF OFF
2 =
ON OFF OFF OFF OFF
3 =
OFF ON OFF OFF OFF
4 =
ON ON OFF OFF OFF
5 =
OFF OFF ON OFF OFF
6 =
ON OFF ON OFF OFF
7 =
OFF ON ON OFF OFF
8 =
ON ON ON OFF OFF
9 =
OFF OFF OFF ON OFF
10 =
ON OFF OFF ON OFF
11 =
OFF ON OFF ON OFF
12 =
ON ON OFF ON OFF
13 =
OFF OFF ON ON OFF
14 =
ON OFF ON ON OFF
15 =
OFF ON ON ON OFF
16 =
ON ON ON ON OFF
Up to 16 x CM705B can be fitted to the Solution E Series panel.
Up to 8 x CM705B can be fitted to the Solution 144 panel.
Table 4: CM705B Address Configuration and Output Allocations
CM705B
Installer Reference Guide
Output Number
9 to 12
13 to 16
17 to 20
21 to 24
25 to 28
29 to 32
33 to 36
37 to 40
41 to 44
45 to 48
49 to 52
53 to 56
57 to 60
61 to 64
65 to 68
69 to 72
7
Advertisement
Table of Contents
