Product Introduction; Inverter Overview - Goodwe DNS Series User Manual

To ensure IP65, inverters must be sealed well, please install the inverters within one day
after unpacking. Please seal all used terminals / holes, any unused terminals / holes are
not allowed to be kept open. Make sure that there is no risk of water or dust entering
terminals / holes.
GOODWE provides standard manufacture warranty to inverter products, which will be delivered
with the product. We also provide prepaid warranty extension solution to our customer. You can
find the details about the terms and solutions from official website: https://en.goodwe.com/war-
ranty.asp.
03

3 Product Introduction

3.1 Inverter Overview

1 2 3 4 5
1. PV Input Terminal 2. DC Switch
DRED/CT/Remote Shut
AC Output
4. down Communication 5.
Terminal
Cable Port
7. LCD 8. Button
10. Mounting Plate 11. Heat Sink
Item Name
Description
1 PV Input Terminal
For PV string connection
During normal operation, it can shut down the inverter after
2 DC Switch
it is disconnected from the grid by the AC breaker.
3 Communication Module Port
For 4G/LAN/GPRS communication; RS485 communication
4
For CT/DRED/RSD Communication
Communication Cable Port
5
For AC cable connection
AC Output Terminal
6
Display the state of the inverter
LED
7
Operation data viewing and parameter configuration.
LCD
8
For configuration and viewing parameters.
Button
9
Connect the invter to the ground and avoid electric hazard.
Ground Terminal
10
Hang the inverter on the wall.
Mouting Plate
11
For heat dissipation.
Heat Sink
6 7 8 9 10 11
WiFi/4G/LAN/GPRS Communication
3. Module Port or RS485
Communication Cable Port
6. LED
9. PE Terminal
04