Riello RiCLOUD NA Series Quick Start Manual page 3

3
2
1
RICLOUD DIRECT FUNCTIONS
Function RF pairing - MODE button (9)
There are two different types of pairing available:
1) Single direction (SIn): to pair the thermostat with a RF
receiver as zone receiver.
2) Double direction (dOU): to pair the thermostat with
boiler RF receiver or Wifi - Box.
Follow the procedure below:
1) Connecting an RF receiver (SIn)
- press the MODE button (9) for 5 seconds
- check that type of pairing is SIn, if not press
(1) for 5 sec to select it. Verify that SIn is displayed
- press several times the MODE button (9) to select the
relay type to remote
Fan
The RF receiver will be assigned fan
management
Cool The RF receiver will be assigned cooling
management
8
9
10
Heat The RF receiver will be assigned heating
management
Move the RF receiver to pairing mode, by
pressing and holding the transparent LED
button. The transparent LED button will
simultaneously flash green and red.
Look at the display and wait up the "- -" disappear
and a number appears (channel number), press the
PROG button (2) to enter and exit. The flashing mode
on RF receiver automatically returns to normal status
button
confirming the end of the pairing procedure.
2) Connecting an RF receiver or wifi box to the
boiler (dOU)
- press the MODE button (9) for 5 seconds
- check that type of pairing is dOU, if not keep press
button (1) for 5 sec to select it. Verify that dOU is
displayed.
3