Low Mode; High Mode - MAC3 Sensopress LCD User Manual

Table of Contents

This mode is necessay for choosing the low threshold of intervention for the chosen channel.

It is possible to enter the LOW mode from whatever other mode by choosing the sign GO to LOW

with the button Menu and by pushing yes/+.

The LOW mode allows to set-up the minimum point of intervention. On the display it is shown the

chosen channel ready to be modified (in the single channel version it is shown LOW), the current

minimum threshold identified by the user (HIGH: 638 cm in Figure 7) and the minimum level to be set-

up (Low Level: 012 cm in Figure 7). By pushing the Yes/+, No/- buttons it is possible to increase or

decrease the wanted minimum threshold; the minimum threshold cannot exceed the maximum one; if

by mistake the minimum threshold overtakes the maximum one, the value of the minimum one will

start again from 000. With the Menu button it is possible to memorize the set-up value and to pass to

the changing state request; if no button is pushed, the device after a few minutes goes to the AUTO

state.

Chosen channel

In the single

output version

it is shown

LOW

Low threshold possible to set-up

Figure 7

with the Yes/+ e No/- button for the

To set-up the low threshold of a channel which is not the selected one it is necessary to go to the

CHANNEL mode and choose the wanted channel by following the instructions described in paragraph

4.3.1 CHANNEL Mode.

This mode is necessary for setting-up the high threshold of intervention for the chosen channel.

It is possible to enter the HIGH Mode from whatever Mode by selecting the sign GO to HIGH with the

Menu button and by pushing Yes/+.

The HIGH Mode allows to set-up the maximum point of intervention. On the display it is shown the

selected channel ready to be modified ( in the version with a single output it is shown HIGH), the

current minimum threshold (LOW: 099 cm in Figure 8) and the maximum level to set-up (HIGH

4.3.2

LOW Mode

chosen channel

4.3.3

Sensopress_LCD_Rev_00_Eng.doc Eng

Current set-up high threshold for

the chosen channel.

Table of Contents