Introduction - ELSA MicroLink ISDN/PCC-16 User Manual

1

Introduction

About this manual
Symbols and
conventions
S interface
0
S/T interface
Changes to this
manual
Package contents
NOTE
◊ ◊
MicroLink ISDN/PCC-16 Manual © 1997 ELSA GmbH
This manual describes the installation, the features and the operation of the
MicroLink ISDN/PCC-16
ISDN adapter board.
Symbols and icons are used throughout this manual to highlight pertinent
sections of text:
◊ NOTE ◊ denotes important information
A list of items is indicated by bullet symbols:
n ...
Procedures consist of numbered steps:
1. ...
<CR> (Carriage Return) means that the Return or Enter key should be pressed
In this manual, the interface between the ISDN Network Terminator (NT) and
the terminal devices is generally referred to as "S
other countries other names may be common, such as "S/T interface"
which is commonly used in the USA.
®
ELSA MicroLink products are subject to continual development. Thus it is
possible that the printed documentation does not correspond to the latest
release. You will always, however, find the latest information on the ELSA
ONLINE Support BBS. See page 42 for contact numbers.
Before you start installing your ELSA MicroLink
make sure that your package is complete:
MicroLink ISDN adapter board
n
ISDN line connection cable
n
Printed manuals
n
MicroLink CD
n
Proof of license (yellow label)
n
If any item is missing or damaged, please contact your dealer. ELSA reserves
the right to make changes to the package contents without prior notice.
Introduction
interface" or "S bus". In
0 0
®
ISDN adapter board, please
5