ELSA MicroLink ISDN/PCC-16 User Manual page 32

Appendix: CAPI Error Codes
CAPI Meaning
error
code
110Ah Controller cannot support external devices
110Bh Controller cannot support external devices
Problems with the Protocol
3001h No support for this B1 protocol
3002h No support for this B2 protocol
3003h No support for this B3 protocol
3004h No support for this B1 protocol parameter
3005h No support for this B2 protocol parameter
3006h No support for this B3 protocol parameter
3007h No support for this B protocol combination
3008h NCPI not supported
3009h Unknown CIP value
300Ah No support for this flag (reserved bits)
300Ch Data-block length not supported by the current
protocol
300Dh Reset procedure not supported by current protocol
No support for this mode of operation
31FFh Additional connections not possible with this
application
32FEh No additional B channel level 3 connection available
32FFh No additional B channel available
General causes of broken connections
0000h Normal break in the connection
3301h Protocol error, level 1 (line broken or B channel
deactivated by D channel protocol)
3302h Protocol error, level 2
3303h Protocol error, level 3
Error Codes from the ISDN
3490h Normal break in the connection
32
Reason and possible solution
System resources problem, possibly too
many
applications running at this time.
The connection was ended properly at both
ends
The connection was ended properly at both
ends
MicroLink ISDN/PCC-16 Manual © 1997 ELSA GmbH