1Tr6 (Germany) Drivers - ELSA MicroLink ISDN/PCC-16 User Manual

NOTE
◊ ◊
/e
Example:
NOTE
◊ ◊

1TR6 (Germany) Drivers

The following driver options are available for all 1TR6 drivers:
Option
none
/d
/i
/q
/vxx
/l
Only if the CAPI driver has not been loaded previously
1)
Please refer to the README file for your ISDN adapter card
2)
NOTE
◊ ◊
MicroLink ISDN/PCC-16 Manual © 1997 ELSA GmbH
The correct setting for your MSN within a private branch exchange (PBX)
depends on the type of exchange in use. It may be necessary to enter your
complete telephone number, your extension number or even the last digit of
your number as the MSN. If this is not clear from the PBX documentation, you
can find the correct method by trial and error.
With the parameter /e , the last MSN digit of an incoming call is used as EAZ.
The driver is called with:
DSS1CAPI /e <CR>
Incoming calls with an MSN of, for example, 929092 will result in an EAZ of
'2', incoming calls with 929094 will result in an EAZ of '4'.
The parameters /e and /n<eaz>=<msn> must not be used simultaneously.
All that remains now is to configure your ISDN application for the EAZs and
their respective MSNs. This is done in the driver call.
Meaning
Install driver software, if possible
De-install driver software
Display current installation of the ISDN adapter board
Suppress screen messages
Set CAPI interrupt vector to xxh (instead of F1h)
Display connection status in the upper right screen corner
The driver software can be loaded automatically at start up by including the
appropriate command line in your AUTOEXEC.BAT file.
Appendix: Options with the ISDN Drivers for DOS
1)
2)
35