Drivers For The Usa - ELSA MicroLink ISDN/PCC-16 User Manual

Appendix: Options with the ISDN Drivers for DOS

Drivers for the USA

The following options are available with the US drivers:
Options
none
/d
/i
/q
/vxx
/l
/cd=08
/cd=0A
/cs1=<spid1>
/cs2=<spid2>
/cn1<dn1>
/cn2<dn2>
Only if the CAPI driver is not loaded already.
1)
Please refer to the README file for the ISDN adapter card.
2)
For AT&T 5ESS point-to-point operation, no SPID/DN should be used.
3)
Only if both B channels are to be operated simultaneously.
4)
36
Meaning
Driver software will be installed, if possible
De-install the driver software
Inquiry about the current ISDN board installation
Suppress the display of on-screen messages
Set CAPI interrupt vector to xxh (instead of F1h)
Display connection status in the upper right screen corner
Load the AT&T 5ESS Custom protocol driver
Load the National ISDN-1 protocol driver
Set the SPID for the first B channel
Set the SPID for the second B channel
Set the DN for the first B channel
Set the DN for the second B channel
MicroLink ISDN/PCC-16 Manual © 1997 ELSA GmbH
1)
3)
3)
3) 4)
3)
3) 4)
2)