Table of Contents
Advertisement
SOFTWARE UPDATES
The WebUI will ask the user to confirm that there is a serial cable connected between the display and
module to be uploaded. If the cable is connected, press OK to continue.
Figure 6-7 WebUI Module Upload
The display module will then transfer the load setup code to the module to be updated and provide a
menu of options.
6.1.3 Reset VLP Module
This menu is used to reset the VLP module. This may be necessary if an attempt has been made to load
a new configuration and the process cancelled before complete. Unlock the screen as described in
section 6.1.5.1, then press the Reset VLP button and the WebUI will ask for confirmation first.
Figure 6-8 WebUI Reset VLP
6-5
SIG-QG-20-02
JANUARY 2021
Version : A.2
Advertisement
Table of Contents
