Table of Contents
Advertisement
5.5
MAINTENANCE LOG (GCP 4000/5000 ONLY)
The Maintenance Log is a detailed record of all programming, configuration, and calibration changes to
the unit, providing a maintainer with a detailed look into any events affecting the unit. This log can also
be filtered and downloaded.
5.6
SEAR LOG (GCP 4000/5000 ONLY)
The SEAR Log enables the user to view and sort through all recorded SEAR state changes as seen by
the independent monitoring of the SEAR IIi. Users can refine the view to show only Basic, Advanced, or
Trace Events. The SEAR IIi configuration change information is received from the GCP. The log can
store up to 180,000 events.
5.7
SEAR INCIDENTS (GCP 4000/5000 ONLY)
The Incidents tab provides a detailed report of all saved GCP incidents. Incident storage is an important
feature in the SEAR IIi. The SEAR IIi is capable of storing a range of events after an incident in a file that
can be securely stored. Each line of data in the file is identified by a security code that validates that the
data has not changed.
SIG-QG-20-02
Version : A.2
Figure 5-13 Maintenance Log WebUI
5-9
REPORTS & LOGS
JANUARY 2021
Advertisement
Table of Contents
