Advertisement
MOUNTING
Addressable Interface Models XTRI-S, XTRI-D, and XTRI-R mount directly into a (user supplied) UL-
listed/recognized double gang or 4 inch switchbox. Fasten the module to the switchbox with the
switchplate using the two screws provided.
A red LED will blink to indicate an off-normal input switch position and/or an internal relay transfer.
NOTE: Be sure to program the XTRI before fastening the switchplate to the unit.
Figure 14
Mounting the XTRI-S/-R/-D
ELECTRICAL RATINGS
Operating Voltage
Max Average Current (RMS)
MODULE STATUS LED
Flash Color
Green
Normal Supervisory operation
Amber
Device is in trouble
Locate/Alarm
Red
Output Active (XTRI-R only)
No Flashes
No power or need to be replaced
A6V101055479_en--_a
XTRI-S
XTRI-D
XTRI-R
Condition
7
firealarmresources.com
13-32 Vdc
650µA
950µA
750µA
Flash Intervals (Seconds)
10
4
1
10
-
Advertisement
