Suzuki RM-Z250L9 Easy Set-Up Manual page 11

THROTTLE
Align the matching mark on the handlebars with mat-
ing surface of the throttle housing.
Install the throttle assembly with two screws after the
assembly is positioned so that there is approximately
0.5–1.0 mm of clearance between the grip end and the
end of the handlebars.
 WARNING
Improper throttle installing can interfere with
smooth throttle grip operation. It can result in
an accident.
Check to ensure that the throttle operates
freely and closes automatically.
 Throttle case screw: 3.8 N·m (0.39 kgf-m)
A: Throttle assembly
B: Matching mark
C: 5 × 20 mm screw
Fit the rubber cover onto the throttle housing.
A: Rubber cover
10