Using An Sd Card - Hoffrichter point 2 User Manual

Using an SD card

General information
The use of an SD card during therapy enables the most important therapy data to be
saved long-term and detailed. The physician can readout and evaluate this data via the
TRENDset PC software. Furthermore, the physician may set up new therapy parameters
using TRENDset and send them to the patient to update its therapy requirements. As
soon as the SD card is inserted, the device imports the modified therapy parameters.
Please note: Only HOFFRICHTER SD cards can be used. These has to be formatted by
TRENDset (see page 97).
Inserting the SD card
1. Ensure that the device is in standby mode (see page 32).
2. Insert the SD card into the SD card slot.
0
0 2
2 2
B 1
J A
The device starts initializing while the message "Do not remove the SD card" is
displayed.
+ *+/ .!)+2!
/$!  .
Finally the symbol
depends on the device settings.
Please note: During the initialization process do not remove the SD card at any
time! This could lead to loss of data or damage the SD card.
3. After successful initialization, the message disappears. If the SD card con-
tains valid new therapy parameters, the device is going to import them. Finally
"New Parameters were accepted" indicates initialization to be successful.
!3  . )!/!.0
3!.! !,/!
4. By pressing the enter key
matically.
70 Operating the Device
is shown at the display. The time required for initialization
or after 10 s the message will be disappear auto-