General Safety Summary - Tektronix AWG7000 Series Quick Start User Manual

General Safety Summary

General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
To Avoid Fire or Personal Injury
Use Proper Power Cord.
Use only the power cord specified for this product and certified for the country of use.
Ground the Product.
This product is grounded through the grounding conductor of the power cord. To avoid electric
shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output ter-
minals of the product, ensure that the product is properly grounded.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markings on the product. Consult
the product manual for further ratings information before making connections to the product.
Power Disconnect.
The power cord provides Mains disconnect.
Do Not Operate Without Covers.
Do not operate this product with covers or panels removed.
Do Not Operate With Suspected Failures.
If you suspect that there is damage to this product, have it inspected by
qualified service personnel.
Avoid Exposed Circuitry.
Do not touch exposed connections and components when power is present.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation.
Refer to the manual's installation instructions for details on installing the product so it has
proper ventilation.
iii
AWG7000 Series Quick Start User Manual