TechniSat TECHNIRADIO 6 IR Instruction Manual page 143

> Select [Manual config] then [Wireless] to launch manual configuration.
> Now select whether to allow automatic retrieval of the IP address, gateway
etc. from your router (DHCP active) or if you would like to enter this manually
(DHCP inactive).
Please take into account that automatic retrieval of the IP address, gateway,
subnet mask only works if the DHCP function is activated in your router.
> In sequence, enter the IP address, subnet mask, gateway address, primary
DNS and secondary DNS (if required) using the SELECT knob. Confirm the set
value by pressing the SELECT knob.
> Now enter the name (SSID) of your WLAN network using the virtual keyboard
and confirm with the SELECT knob.
> Select whether your WLAN network is Unencrypted, encrypted by WEP or by
DE
EN
FR
NL
143