TechniSat TECHNIRADIO 6 IR Instruction Manual page 104

6.4 General device functionality
6.4.1 Switching on the device
> First prepare the TECHNIRADIO 6 IR for operation in accordance with the
descriptions in Sections 6.3.1 and 6.3.2.
> Switch on the TECHNIRADIO 6 IR by pressing the
After switching on the device for the first time, you must first configure the
first installation wizard. There are details of this in Section 8.
6.4.2 Switching off the device
> Keep the
The date and time are shown on the display. The display brightness in standby
mode can be adjusted as described in Section 14.4.
104
/VOLUME knob depressed to switch the device to standby mode.
/VOLUME knob (6).