TechniSat TECHNIRADIO 6 IR Instruction Manual page 124

10.5 Scan settings
In this menu item it is possible to set the sensitivity of the scan.
> Open the Main menu by pressing the MENU button and use the SELECT knob
to select [Scan settings].
> Press the SELECT knob.
> Select whether the scan should only stop for stations with a strong signal
[YES] or for all stations (including stations with a weak signal) [NO].
With the NO setting, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with
background noise.
> Then press the SELECT knob to save the setting.
10.6 Audio settings
> Open the Main menu by pressing the MENU button and use the SELECT knob
to select [Audio settings].
> Press the SELECT knob.
124