Casio DT-X8 Series Software Manual page 95

• Setting for Common Operations
The settings in Table 2.61 are for the common operations not related to scanning bar codes.
Table 2.61
Item
[PrintWeight] Section
PrintWeight
[Intensity] Section
Aimer
Illumination
[Multi-step] Section
ReadMode
ReadTimes
Separator
[Scan Mode] Section
Scan Mode
[Decode Deliberation] Section
Decode Deliberation
[Search Mode] Section
Search Mode
Continue.
Description
Specify the calibration value for
thickness of bars.
Specify the intensity of the Aimer.
Specify of the intensity of the
Illumination LED.
Specify read mode.
Specify the no. of times to scan in
continuous mode.
Specify the separator (= symbol) in
Package read mode.
Specify scanning mode.
Set the deliberation level.
Search mode
95
Setting
Specify in the range of
1 to 7.
Specify 0 or 100.
Specify 0 or 100.
0; Normal read
1; Multi-step read
2; Package read
Specify in the range of
2 to 10.
Specify character
casted in INT-type.
0; Outdoor
1; Indoor (window
side)
2; Indoor
3; Warehouse
100; Extremely fast
decoding, but limited
symbologies.
200; Fast decoding with
some limited symbologies.
400; Normal
800; Slow decoding, but
adequate number of
symbologies covered.
0; Extremely slow
decoding, but many
symbologies covered
-
Default
4
100
100
0
2
0
1
400
1