Casio DT-X8 Series Software Manual page 252

Operation method
Prepare Bluetooth receive
Create backup file for sending to satellite terminal
1. Prepare Bluetooth receiving
2. If succeed, display "OK" and execute next step, if failed, the error message and
"NG" will be displayed and do not execute next step.
Receive file
Receive backup file from master device.
1. Backup file will be received from master device which connected with Bluetooth
connection. If already backup file is existed, current backup file will be deleted. If
master device do not start to send within 3 minutes (or no response), the following
message will be appeared.
2. When receive operation is succeed, display "OK" and execute next step. If failed,
message and "NG" will be displayed and do not execute next step.
Execute restore operation
Execute restore operation according to backup file which receive from mater device.
1. Backup tool start and execute restore operation according to backup file which
received from master device
2. If restore is success, display "OK" and if failed, display "NG".
252