Casio DT-X8 Series Software Manual page 275

4.25 Auto rescue tool
This tool is for saving data from out of order terminal by hardware reason.
Release function
This tool can be created data backup file from out of order terminal.
(except can not power on terminal)
Copy this tool's file to correct location into microSD card, then backup file will be created in this
miscroSD inside by starting this tool.
Module configuration
The following file will be located into microSD card.
Module name
CE\ARM\AutoRun.exe
CE\ARM\Setup.exe
Start method
Case of power ON condition terminal, this tool will be started automatically by inserting microSD
card.
Case of power OFF condition terminal, this tool will be started automatically by reset operation.
Exit method
When this tool is succeed, all color LED (except red color) will be change to turned on and also
notice by vibration (10 times /100msec period).
When this tool is failed, red color LED will be blinking and notice by vibration (10 seconds).
Note : backup available data is related with backup tool.
Application
Application
275
Detail