Casio DT-X8 Series Software Manual page 83

2.3.3 Scanning Parameters
Conditions that allow scanning a symbology in specific modes can be set for each readable
symbology.
Readable Symbology
Bar code symbologies that are enabled or disabled for scanning can be specified. If only specific
symbologies are to be scanned, set "Enable" for scanning on these symbologies only and
"Disable" on the other symbologies. This reduces decode processing time and lowers the error
rate. The default is "Enable scanning on all the symbologies".
Readable Digits
The no. of readable digits can be set for each symbology. If only specific no. of digits is to be
scanned, specify it for each readable symbology. This reduces decode processing time and lowers
the error rate.
Enable or Disable Check Digit
Check digit can be set to "Enable" or "Disable" for each readable symbology. Setting the check
digit will lower the error rate.
The functions of the Imager Library relevant to the Scanning Parameters are as follows.
IMGSetAztec
IMGGetAztec
IMGSetCodabar
IMGGetCodabar
IMGSetCodablock
IMGGetCodablock : Retrieves the decode options for Codablock F symbology.
IMGSetCode11
IMGGetCode11
IMGSetCode128
IMGGetCode128
IMGSetCode32
IMGGetCode32
IMGSetCode39
IMGGetCode39
IMGSetCode49
IMGGetCode49
IMGSetCode93
IMGGetCode93
IMGSetComposite
IMGGetComposite : Retrieves the decode options for Composite symbology.
IMGSetDataMatrix
IMGGetDataMatrix
IMGSetEAN13
IMGGetEAN13
IMGSetEAN8
IMGGetEAN8
: Sets up decode options for Aztec symbology.
: Retrieves the decode options for Aztec symbology.
: Sets up decode options for Codabar symbology.
: Retrieves the decode options for Codabar symbology.
: Sets up decode options for Codablock F symbology.
: Sets up decode options for Code11 symbology.
: Retrieves the decode options for Code11 symbology.
: Sets up decode options for Code128 symbology.
: Retrieves the decode options for Code 128 symbology.
: Sets up decode options for Code32 symbology.
: Retrieves the decode options for Code32 symbolgy.
: Sets up decode options for Code39 symbology.
: Retrieves the decode options for Code39 symbology.
: Sets up decode options for Code49 symbology.
: Retrieves the decode options for Code49 symbology.
: Sets up decode options for Code93 symbology.
: Retrieves the decode options for Code93 symbology.
: Sets up decode options for Composite symbology.
: Sets up option settings for DataMatrix symbology.
: Retrieves the decode options for DataMatrix symbology.
: Sets up decode options for EAN13 symbology.
: Retrieves the decode options for EAN13 symbology.
: Sets up decode options for EAN8 symbology.
: Retrieves the decode options for EAN8 symbology.
83