Log Files; Output Files; Backup File - Casio DT-X8 Series Software Manual

7 Version
8 Message
9 User identifier
10 User-defined
Data
11 Previous
12 Next
13 Close

Log Files

There are two types of log files:

• Output files

The output file for the current log
The storage folder is \FlashDisk\Molog (initial setting).
If the specified capacity (initial setting is 40KB) is exceeded, the next setting is the backup
file.

• Backup file

This is the file to move data to if the specified capacity of the output file is exceeded.
The storage folder is \FlashDisk\Molog\Backup (initial setting).
If the total of the file sizes in the storage folder exceeds the specified capacity (initial
setting is 120KB), log files are deleted, starting with the oldest.
Log Files have the following file names.
Item
Name MoLog<YYYY><MM><DD>_<NNN>. csv*
※ <YYYY><MM><DD> is the date the file was generated.
<NNN> is a serial number (three digits, decimal) used in the event that multiple logs
exist on the same day. It is a numerical string starting from "001". The number of files on
the same date is limited to 999.
Displays the version of the displayed log.
Displays messages for the displayed log.
Displays the user identifier for the displayed log, if one has been
set.
If there is any user-defined data for the displayed log, it is displayed
with commas as separators.
Displays the previous log on the List screen.
Displays the next log on the List screen.
Closes this screen and displays the List screen.
273
Contents