Casio DT-X8 Series Software Manual page 35

2.1.10 LED
Basic Specifications
There are two LEDs integrated in the terminal, one on the right side for the user notifications and
the other for charging the battery complete notification.
Table 2.15
LED
Right side LED
Left side LED
Notes:
• The user notification LED on the right side can be used to indicate various notifications by
the OS and other notifications defined by the user.
• All colors available in the LED on the right side are indicated with the System Library.
• The charging battery complete LED on the left side cannot be controlled or manipulated for
its ON/OFF state and color with software.
User Notification (Alarm)
This indication mode is used for alarm notification and etc. The LED can be lit for a specific time
with CeSetUserNotification()API function.
Table 2.16
Operating mode
Blink interval
Continuous ON time
Note:
Indication for scanning a bar code has the priority over other indications.
Scanning
This is used for notification of a scanning result which is controlled with the System Library.
Table 2.17
Operating mode
Scanning complete
Scanning in error
Color
Red User notification (alarm), scanning a bar code
Green Scanning a bar code
Blue Connection established via Bluetooth
Orange Connection established via WLAN, WWAN or GPS
Cyan Resume
Magenta ActiveSync connecting
Orange While charging battery pack.
Green Charging battery pack is complete.
Red Charging Error.
ON in red for 1 second, OFF for 2 seconds
ON for 30 minutes (OFF when VDET is detected.)
Specification
ON in green for a specified period of time, then OFF. L_SCANOK
ON in red for a specified period of time, then OFF.
35
Description
Specification
Attribute
L_SCANERR