Setting Measurement Intervals - Microlife WatchBP Office ABI Instruction Manual

Taking measurements using WatchBP Ofice ABI (cont.)
Setting measuring intervals in «ROUTINE»
Mode
1) Pressing and holding the Start/Stop Button for 3
seconds.
2) Press the M Button to adjust the measurement
interval, then press the Start/Stop Button to
conirm, the device will go back to stand-by
Mode.
15 30
60
45
The default measuring interval is 15 seconds. The
*
interval can be set as 15, 30, 45 or 60 seconds.
22
Press and hold
for 3 seconds...
AUSCULT